Emergency stop, protective door monitoring, electro-sensitive protective equipment, selector switch, two hand operator panel, enabling switch evaluation, pressure sensitive mat monitoring, monitored start-up, two hand control acc to EN 574 function|300 function blocks typical, 300 VAC insulation voltage rated, 3 deg of pollution|2500 VAC surge voltage resistance rated, 1.685 A consumed current for rated value of supply voltage|2500 VAC surge voltage resistance rated value|15 g/11 ms shock-resistance, 1000 1/hr operating frequency maximum, 5 to 500 Hz, 0.75 mm vibration resistance according to IEC 60068-2-6|Suitability for use monitoring of floating sensors, monitoring of non-floating sensors, position switch monitoring, emergency off circuit monitoring, valve monitoring, opto-electronic protection device monitoring, proximity switch monitoring, safety related circuits|32 bit for input and output with PROFIBUS-DP|Parameterizable inputs, parameterizable outputs product function|8 safety related, 0 non-safety related inputs, 2 safety related 2-channel, 2 for testing contact based sensors outputs|0 to 150 ms input delay time 420 ms recovery time of the safe outputs|Vertical snap mounted to DIN rail/screw mounted with additional push-in lug mounting type|20 to 14 AWG solid and stranded number as coded connectable conductor cross-section|100 Ohm DC resistance of the cable maximum|Finger safe protection against electrical shock|-40 to 85 deg C storage/transport|70 to 106 kPa air pressure according to SN 31205|DIN rail mount|IP20 degree of protection